hello!!!i would like to ask something?i have an s3 modell 2003 with can bus!!!i recently installed a navi plus!!!i connected the speed signal cable in the 31 pin behind the instrument cluster!i programmed my navi with vag com to use the gala signal.is this right?i heard that other s3 use the abs signal!!!
|
| gala or abs???help!!!
|
|
OK!!!i read what you wrote about gala signal!!!can i ask you something more?can you tell me why when i have the navigation mode in my fis display above the navi information i see the track number and temperature when in other factory fitted navis in the s3 the can see the cd number and the track number?have i made any mistake? :o thank you!!!
|
| gala or abs???help!!!
|
|
| Zitat: | | when i have the navigation mode in my fis display above the navi information i see the track number and temperature |
Is no mistake/error, is correctly like that
first place CD track number
second place temperature
(valid for navi plus is coding monochrom only red FIS display)
| Zitat: | | when in other factory fitted navis in the s3 the can see the cd number and the track number? |
Another navi plus with other software conditions which is coding on colour FIS display, or what do you mean ?
best regards
Klaus
|
| gala or abs???help!!!
|
|
i mean that when i programm my car with vag com as monochrome display it shows me the track number and the temperature!!!in other cars lokie mine,with the same coding(factory fitted navi) at the display showing the cd number and the track number with no temperature!!!all of the them only at the navigation mode!!!note that my car is an audi s3!!!
|
| gala or abs???help!!!
|
|
|
|
thank you for your answer!!!i do not speak so good german!!!can you please help me in english what have i to programm?thank you!!!
|
| gala or abs???help!!!
|
|
at first NOTE !! Is not possible for all instrument cluster ! (to “speak” with channel 19)
If it is possible you can be happy, not available don´t worry….
Please use VAG Com online demo
http://www.ross-tech.com/vag-com/tour/main_screen.html
first step button select
2. 17-instruments
3. Adaptation-10
4. channel number 19 with up and down (or directly as number)
5. push button > read
6. message error comes = cheese/bad…. channel 19 is missing/not available
finito/ fin /The End /Ende….
Is channel 19 available you can continue also with
7. input new value
8. push button TEST, it´s okay then
9. pus button SAVE
10. push button DONE GO Back
11. push button CLOSE controller GO Back
12 push button GO Back
good luck
Klaus
|
| gala or abs???help!!!
|
|
do you know the code i have to insert?
|
| gala or abs???help!!!
|
|
Tacho-Beleuchtungssteuerung
0nnnn = Tacho wird erst mit Lichtschalter beleuchtet
1nnnn = Zeiger permanent beleuchtet
2nnnn = Zahlen permanent beleuchtet
3nnnn = Zeiger und Zahlen permanent beleuchtet
Bordcomputer
n0nnn = nur Ebene 2
n1nnn = Ebene 1 und 2
Fahrerinformationssystem (FIS)
nn0nn = FIS aktiviert
nn1nn = FIS deaktiviert
Aussentemperaturanzeige
nnn1n = Anzeige aktiviert
nnn0n = Anzeige deaktiviert
Funkuhrsteuerung
nnnn0 = Funkuhr deaktiviert
nnnn1 = Funkuhr aktiviert
Try code 30011
|
| gala or abs???help!!!
|
|
thank you!!!
|
| gala or abs???help!!!
|
|
|
|
