nobody answered your question...
"wobei die Rote Leitung mit Dauer Plus zu verbinden ist" ->
connect the red/blue wire at 12V+ from Battery (not ignition)
|
|
So, if I understanding correctly:
Red/Blue - Connect to any 12V source which is permanently live - not switched by the ignition - pin 7 on the service connector.
Brown - Connect to earth - Pin 8 (Masse) on the service connector.
Green/Brown - k-bus (diagnosis bus) - Pin 3 on the service connector.
Grey/White - CAN Bus Low - connect to either CAN_L on the TMC or Navi connector.
Grey/Red - CAN Bus High - connect to either CAN_H on the TMC or Navi connector.
Is this correct? 
|
|
|
|
